[Boba1214]

Hi guys, I'm looking into camber plates for my M2C that I DD and will be taking to the occasional autocross and HPDE. I've been doing research on these but the threads I've read were from a couple years ago, and the consensus back then seemed to be the Millway Street camber plates for my application. I believe there's been a few manufacturers who have also come out with low to no NVH versions as well so wanted to see if you guys had any experience with those compared to the Millway.

I'm primarily looking for front camber to be able to get to -3.2deg (I believe this is sufficient to prolong life of tire?) Will be staying on stock suspension otherwise.

Thanks!