Quote:
Originally Posted by Pyrat 2
Post away. That's what this forum is for. Surprised that you have no strut rub in the front with a 265. Mine was not rubbing with a 255 and 30 offset but it was very close and I wasn't comfortable with such a small amount of clearance. Might have to do with the tires.
Would like to know where you end up in the back to get to no rub. I've got 35 offset and 265/35-19 with no rub. Was going to take it up to 275 on my next tire purchase. Looks like it'll fit with no issue.
|
Just didn't want to muddy the waters.
Here is how she is sitting now. When I can get her on the lift again I will take pictures of the clearance in the front for you.
Wheel:BC Forged RZ39 In Brushed Bronze finish
Wheel Size:19x9.5 +30 Front
19x10.5 +35 Rear
Tire: Michelin PSS 265/35/19 Front
Michelin PS4S 295/35/19 Rear
Does rub in rear, will report back after negative camber following alignment.
UPDATE: After alignment -1.5* camber F, -2.59* camber R and bumper tabs trimmed only rubs with 4 people in the car under heavy dips at speed. Overall, I can live with that fitment, as this is unusual circumstances. Following higher spring rate after coilovers, I do not foresee any rubbing at all.
