Quote:
Originally Posted by tux2005
Do you have a rough estimate of how much brake fluid is used during the DSC process? I.e. if you're just filling the reservoir with fluid and not putting fluid in the pressure bleeder are you likely to need to refill? I'd obviously refill as necessary during the pre-DSC bleed/flush, and it's easy enough to refill after the DSC process and before the final bleed (although I can't imagine that requires much since everything should be pretty clear).
|
I fill the reservoir full before starting each bleed cycle. For the rear you don't really have to worry about going dry, but the fronts send fluid out at a much higher rate. You should still be able to do 4 hard pedal pumps in front before checking the reservoir and seeing how low you are.