Quote:
Originally Posted by asciimike
For the driver side, you should only have to code:
- Sitzairbag_Thorax_Fahrer (Driver seat airbag)
- Sitzpositionsensor_Fahrer (Driver seat position sensor)
- Sitzpositionsensorserkennung_Sitzmemory_Fahrer (Driver seat position sensor memory)
The occupancy sensor is passenger side only (it's assumed that if the car is in motion, the driver side is occupied).
What is the fault code you're getting? |
So I hope this post helps someone in the same situation in the future. I have seen a few people with similar problems to what I was having trying to find a solution.
I did all of that, hence why it was driving me crazy. I coded everything possible that I thought could be part of a seatbelt restraint and was having no luck.
No matter what was coded as "Nicht Aktiv" there would still be one error for a restraint system, even with the seat belt buckle connector plugged in correctly. Also Tool32 would not be able to erase it.
I coded the car back to factory coding then coded out the same things that was discussed in this thread, cleared the existing codes that popped up with tool32, voila, magically no more errors.