View Single Post
      06-21-2019, 11:40 AM   #12
kfscoll
Second Lieutenant
kfscoll's Avatar
United_States
209
Rep
212
Posts

Drives: ‘18 MG M2 6MT, ‘15 MW X3 35i
Join Date: May 2017
Location: Cincinnati, OH

iTrader: (0)

Quote:
Originally Posted by gphung View Post
I guess it won't be the end of the world if the #1 leaves a hazy finish. I could pop the trim back in, order/find some of the Menzerna 4000, and finish it off with that afterwards if needed. I have the following Lake Country Hydro-Tech foam pads: blue, orange, and crimson (red). I'm thinking of maybe just using the red as that's meant for applying wax so it shouldn't be too rough for the plastic. If it doesn't work, I could go up to the orange. Definitely won't be using the blue.

Thanks for your help!
Yep, I'd do the same - start with the red and go to the orange if necessary. That might work just fine with the Novus #1.

You don't necessarily need a Menzerna polish if the Novus doesn't work out; those just happen to be the automotive polishes I have lying around so that's what I use. A gentle swirl remover or something a little finer plus your red (or a white) pad should work great also.
Appreciate 0